Using an Audio Interface with Roll 20

A few questions; I am having trouble getting Roll20 to route audio to the right inputs. I have a microphone connected to my audio interface through XLR, and the input of Roll20 is set to my interface (which is a Apogee Symphony connected with an Avid HD Native). Sometimes it works fine and sometimes it doesn’t detect my microphone. It also does not always route the audio to my speakers. Same audio interface, but sometimes it routes my audio to my laptop speakers, and sometimes I get nothing. Any suggestions? My next question; If I have multiple microphones plugged into my interface, is there a way to have it detect both microphones? I have a split game where half of the people meet in person and half online and I wanted to setup a second microphone for the table.  I am am using Google Chrome on a MacBook Pro. 

Hello Theron, I'm sorry to hear that you're having issues with the site.  Please note that some of these steps may not apply to you, however, l et's carefully work through Steps 1 through 8 of the Roll20 guide to  Audio Visual Troubleshooting : Step 1: Make sure you’re using the most recent version of either Chrome or Firefox Please check if these issues persist when using both Chrome  and  Firefox. Step 2: Give Roll20 permission to use your microphone and camera Step 3: Make sure Video and Voice are turned on inside Roll20 Step 4: Clear your Web Browser’s Cache Step 5: Make sure you have the right ports open Step 6: Check if your camera is working with WebRTC Step 7: Check that your camera is functioning Step 8: Do a bandwidth test If none of the above succeeds, please thoroughly work through  Step 9 : Step 9: Solving Technical Issues Step 9.2: Ensure that there are no extensions/addons interfering with Roll20 Please disable  all  add-ons/extensions. Step 9.4: Provide a bug report Please ensure that the Console Log is complete. If you have a macbook pro (or a macbook in general), try this: open a terminal and type "sudo killall VDCAssistant" to see if this solves the issue. Information can be found  here in an Apple forum post . Thank you!