I've recently tried to apply the MERP sheet updates from github and have ended-up with a very messed-up looking character sheet. My guess is I've not applied everything propery ... can someone please let me know the exact steps required? Here's what I did: 1. made a copy of my old MERP game, and set the character sheet to "custom" 2. go to <a href="https://github.com/Roll20/roll20-character-sheets/tree/master/MERP" rel="nofollow">https://github.com/Roll20/roll20-character-sheets/tree/master/MERP</a> 3. open <a href="https://github.com/Roll20/roll20-character-sheets/blob/master/MERP/merp_2nd_ed_sheet.css" rel="nofollow">https://github.com/Roll20/roll20-character-sheets/blob/master/MERP/merp_2nd_ed_sheet.css</a> 4. copy raw contents (using the button) 5. paste this into the sheet CSS, press save 6. open <a href="https://github.com/Roll20/roll20-character-sheets/blob/master/MERP/merp_2nd_ed_sheet.html" rel="nofollow">https://github.com/Roll20/roll20-character-sheets/blob/master/MERP/merp_2nd_ed_sheet.html</a> 7. copy raw contents (using the button) 8. paste this into the sheet HTML, press save 9. run the game, create a new character ... below is what I get! Basically it is one giant long character sheet with no sections, and the radio buttons at the top do absolutely nothing. Presumably I have missed a critical step here and/or made a newbie error .. advice very welcome! :)