Token Bars covering the Token

On the token options, I normally set the 3 bars, 1 for HP, 1 for AC and 1 for Perception. The issue I am having now is that when I set the bars, the bar I have designated for Hp covers the token to where you can't tell what the token is. The last game I had setup the same way but the bar for HP was above the token. What am I doing wrong or has something changed?

Hi Glenn, Bar 3 is lower on the token than Bar 1 and Bar 2. Make sure you are putting the HP in "Bar 1". If that is not it, then it sounds like you may be using a reduced-size token, possibly due to a fractional Grid Size on the Page settings? That effect you described usually happens only on a token that is very small that don't have much transparent padding for margins. Often a reason for having small tokens is if you set a Grid with a fractional Grid Size, such as .5 or .25, at these settings a token that is drag-and-dropped will naturally start at a small reduced size.&nbsp; A solution is to use the size handles on the token and make the token larger, if that works ok for your game and map. Wiki docs regarding this, <a href="https://wiki.roll20.net/Page_Settings#Scale" rel="nofollow">https://wiki.roll20.net/Page_Settings#Scale</a> If this is not the reason or does not resolve the issue, write back.

Thanks, After looking at it I came to the same conclusion. &nbsp;Thanks again for the quick reply.