I think the only sheets with automatic configurations are the D&D 5E by Roll20 (which you have selected in your config snippet) and the 5E shaped sheet. Looks like you will have to create a stat group for the community sheet you are using. I haven't done this before, but this seems to be the relevant part of the --help: Commands for Stat Groups Stat Groups are the method through which GroupInitiative knows what to do to create the initiative value for a token. Generally, they will be some combination of attributes and adjustments to look up on each token and character. !group-init --add-group --<adjustment> [arguments] [--add-group --<adjustment> [arguments] | ...] Adds a new Bonus Stat Group to the end of the list. Each adjustment operation can be followed by another adjustment operation, but eventually must end in an attriute name . Adjustment operations are applied to the result of the adjustment operations that follow them. Available Stat Adjustment Options: stat-dnd -- Calculates the bonus as if the value were a DnD Stat. negative -- Returns the negative version of the stat bare -- No Adjustment. floor -- Rounds down to the nearest integer. tie-breaker -- Adds the accompanying attribute as a decimal (0.01) ceiling -- Rounds up to the nearest integer. token_bar -- Takes the bonus from the numbered bar on the token. Use 1, 2, or 3. Defaults to 0 in the absense of a number. token_bar_max -- Takes the bonus from the max value of the numbered bar on the token. Use 1, 2, or 3. Defaults to 0 in the absense of a number. token_aura -- Takes the bonus from the radius of the token aura. Use 1 or 2. Defaults to 0 in the absense of a number. For example: --Bounded:-2:2 --Stat-DnD wisdom|max would first computer the DnD Stat bonus for the max field of the wisdom attribute, then bound it between -2 and +2 . Sean J. said: I'm using the D&D 5E Community Contributed character sheet and suspect THAT might be the problem. !group-init-config --apply-standard-config|dnd5eogl
