When using the (<) or (>) symbols for my roll formula. When involved with a number with a decimal ex. (87.5) The formula will have an error. The current examples I have would be [[d100<87.5]] It will come out as an error. Of course a [[d100<87]] or [[d100<88]] would work normally, however I'm using a formula which uses a stat multiplied by .5 . Which after some testing I figured out the problem was the fact that the end value would result in a decimal and the roll never going through, not even with an error. I have currently solved this issue with simply using floor(cs) or ceil(cs) to round up or down to remove the decimal value. However I thought I should bring it up.
