Curious, if you toggle your STR base. Change it, check your attack's damage. Or if you change the attack's damage ability(drop down selector). Does it update correctly? Thanks
If I change the base STR to 16 and click recalculate, it changes the Dmg to 9, and when I change it back to 18 and click recalculate it goes back to 10. Changing the attack's damage ability to lets say DEX will drop the Dmg to 8 and when I put it back to STR it goes back to 10. So unfortunately still screwed up =(
I'm not able to reproduce the calculation error... ;-( If you change the attack's damage multiplier, does the total damage change?
Ok, yes, when I change the multiplier to 2, it will change the Dmg to 14, when I put it back to 1.5 mult the Dmg changes to 12 correctly. But if at any point I hit re-calculate after that, it will go back to 10 :( I guess I can't use the re-calculate button going forward
That's interesting that a recalc is causing the calc to be incorrect. I can verify that a recalc causes the mult value to be reset. ;-( The recalc button should only be used if the sheet appears to stop functioning. Hopefully that is rare. I'll post a bug for that and we'll figure out what's going on. Thanks for your help.